Timing case for BMW 3 Series E36 325tds (1993)
This Timing case technical drawing provides a detailed breakdown of the assembly for the 3 Series E36 325tds. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 1993.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| ONLY APPLIES TO CRANK CASE W/UNMACHIN.PART NO. 2 245249 WITH INTEGRAL INJECTION PUMP CARRIER |
||||||||||
| 01 | Timing case cover, bottom | 1 | 01/1994 | 11142246189 | +core | Shop at ECS Tuning | ||||
| ONLY APPLIES TO CRANK CASE W/UNMACHIN.PART NO.2 242 891 WITH SCREWED ON INJECTION PUMP CARRIER |
||||||||||
| 01 | Timing case cover, bottom | 1 | 01/1994 | 11142244492 | +core | Shop at ECS Tuning | ||||
| 02 | Stud bolt | M6X30-ZNNIV SI | 1 | 01/1994 | 07129904544 | $1.42 | Shop at ECS Tuning | |||
| 03 | Shaft seal | 48X65X10 | 1 | 01/1994 | 11142249532 | $24.02 | Shop at ECS Tuning | |||
| 04 | Screw plug | M20X1,5 | 1 | 01/1994 | 11141461423 | $7.62 | ENDED | Shop at ECS Tuning | ||
| 04 | Screw Plug With Gasket Ring | M20X1,5 | 1 | 01/1994 | 11142244615 | Shop at ECS Tuning | ||||
| 05 | Gasket ring | A20X24-CU | 1 | 01/1994 | 07119963342 | $0.24 | Shop at ECS Tuning | |||
| ONLY APPLIES TO CRANK CASE W/UNMACHIN.PART NO. 2 245249 WITH INTEGRAL INJECTION PUMP CARRIER |
||||||||||
| 06 | Gasket Steel | 1 | 01/1994 | 11142245175 | $27.58 | Shop at ECS Tuning | ||||
| ONLY APPLIES TO CRANK CASE W/UNMACHIN.PART NO.2 242 891 WITH SCREWED ON INJECTION PUMP CARRIER |
||||||||||
| 06 | Gasket Asbestos Free | 1 | 01/1994 | 11142245879 | $29.85 | Shop at ECS Tuning | ||||
| 07 | Hex bolt with washer | M6X50-ZNNIV SI | 15 | 01/1994 | 07119905377 | $0.53 | Shop at ECS Tuning | |||
| 08 | Supporting bracket | D=68MM/50MM | 1 | 01/1994 | 13512245864 | $159.59 | Shop at ECS Tuning | |||
| 09 | Profile-gasket | 1 | 01/1994 | 13512244766 | $6.50 | Shop at ECS Tuning | ||||
| 10 | Profile-gasket | 1 | 01/1994 | 13512244765 | $4.21 | Shop at ECS Tuning | ||||
| 11 | Hex bolt with washer | M8X55-U1 | 3 | 01/1994 | 07119905391 | $1.27 | Shop at ECS Tuning | |||
| 12 | Supporting bracket | 1 | 01/1994 | 12312245747 | Shop at ECS Tuning | |||||
| 13 | Support plate | 1 | 01/1994 | 11162243503 | Shop at ECS Tuning | |||||
| 14 | Hex bolt with washer | M8X20-ZNS3 | 3 | 01/1994 | 07147165618 | $0.73 | Shop at ECS Tuning | |||
Notes
- +core = plus core charge (possibility of a return of the old part)
- ENDED = the part has been discontinued (no longer available).
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 3 Series E36 325tds Timing case?
- This technical diagram illustrates the Timing case within the Engine group for the 3 Series E36 325tds produced during 1993. It provides a detailed exploded view of the components, identifying key parts such as the Timing case cover, bottom (Part #11142246189).
- Which models use the hardware listed in this Timing case?
- The hardware and components featured in the Timing case are specific to the 3 Series E36 325tds produced during 1993. These technical specifications ensure that parts like the Timing case cover, bottom (11142246189) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Timing case assembly?
- Each item in the Timing case corresponds to the numbered list below the illustration. For the 3 Series E36 325tds, you can identify the Timing case cover, bottom by locating its position on the schematic, which then links to the official BMW part number 11142246189 for the Engine section.