Drive shaft,univ.joint/centre mounting for BMW 2500-3.3Li 3.0Si
This Drive shaft,univ.joint/centre mounting technical drawing provides a detailed breakdown of the assembly for the 2500-3.3Li 3.0Si. It includes part names, part numbers and all associated mounting hardware.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 02 | Grooved ball bearing | D=55/D=30 | 1 | 26121225071 | $26.16 | Shop at ECS Tuning | ||||
| 03 | Centre mount | 1 | 26111206502 | $125.71 | Shop at ECS Tuning | |||||
| 05 | Dust protection | 1 | 08/1968 | 02/1977 | 26121100992 | $2.48 | Shop at ECS Tuning | |||
| 06 | Lock Ring | 1 | 26123648156 | $0.98 | Shop at ECS Tuning | |||||
| 07 | Threaded ring with clamp-ring | 1 | 26117514037 | $12.52 | Shop at ECS Tuning | |||||
| 08 | Tooth washer | 1 | 26111100692 | $0.55 | Shop at ECS Tuning | |||||
| 09 | Clamp ring | 1 | 26111207480 | $5.27 | ENDED | Shop at ECS Tuning | ||||
| 10 | Square headed bolt | M8X18 | 2 | 08/1968 | 02/1977 | 23711130250 | $4.27 | Shop at ECS Tuning | ||
| 11 | Washer | 8,4X16X1,6-ZNNV | 2 | 07119907030 | Shop at ECS Tuning | |||||
| 12 | Wave washer | 8,4X15-ZNS3 | 2 | 08/1968 | 02/1977 | 07119904115 | $0.09 | Shop at ECS Tuning | ||
| 13 | Hex nut | M8-8-ZNNIV SI | 2 | 07119905515 | $0.16 | Shop at ECS Tuning | ||||
| 17 | Repair set centralizer | 1 | 08/1968 | 02/1977 | 26111204115 | ENDED | Shop at ECS Tuning |
Notes
- ENDED = the part has been discontinued (no longer available).
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 2500-3.3Li 3.0Si Drive shaft,univ.joint/centre mounting?
- This technical diagram illustrates the Drive shaft,univ.joint/centre mounting within the Drive shaft group for the 2500-3.3Li 3.0Si. It provides a detailed exploded view of the components, identifying key parts such as the Grooved ball bearing (Part #26121225071).
- Which models use the hardware listed in this Drive shaft,univ.joint/centre mounting?
- The hardware and components featured in the Drive shaft,univ.joint/centre mounting are specific to the 2500-3.3Li 3.0Si. These technical specifications ensure that parts like the Grooved ball bearing (26121225071) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Drive shaft,univ.joint/centre mounting assembly?
- Each item in the Drive shaft,univ.joint/centre mounting corresponds to the numbered list below the illustration. For the 2500-3.3Li 3.0Si, you can identify the Grooved ball bearing by locating its position on the schematic, which then links to the official BMW part number 26121225071 for the Drive shaft section.