Fill-in flap for BMW 1 Series E87 130i (2006)
This Fill-in flap technical drawing provides a detailed breakdown of the assembly for the 1 Series E87 130i. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 2006.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 01 | Fill-in flap | 1 | 51177060691 | Shop at ECS Tuning | ||||||
| 02 | Filler pot | 1 | 51177069449 | Shop at ECS Tuning | ||||||
| 03 | Rubber grommet | 1 | 51257075026 | $3.48 | Shop at ECS Tuning | |||||
| 04 | Filler flap actuator | 1 | 03/2007 | 67116987633 | Shop at ECS Tuning | |||||
| 05 | Torx bolt for plastic material | L=16MM | 2 | 07146958583 | $0.25 | Shop at ECS Tuning | ||||
| 06 | Emergency mechanism parking lock | 1 | 51257131748 | $3.57 | Shop at ECS Tuning |
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 1 Series E87 130i Fill-in flap?
- This technical diagram illustrates the Fill-in flap within the Bodywork group for the 1 Series E87 130i produced during 2006. It provides a detailed exploded view of the components, identifying key parts such as the Fill-in flap (Part #51177060691).
- Which models use the hardware listed in this Fill-in flap?
- The hardware and components featured in the Fill-in flap are specific to the 1 Series E87 130i produced during 2006. These technical specifications ensure that parts like the Fill-in flap (51177060691) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Fill-in flap assembly?
- Each item in the Fill-in flap corresponds to the numbered list below the illustration. For the 1 Series E87 130i, you can identify the Fill-in flap by locating its position on the schematic, which then links to the official BMW part number 51177060691 for the Bodywork section.