Intake manifold system for BMW 3 Series E36 320i (1992)
This Intake manifold system technical drawing provides a detailed breakdown of the assembly for the 3 Series E36 320i. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 1992.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 01 | Intake manifold | 1 | 02/1992 | 11611738940 | $1314.41 | Shop at ECS Tuning | ||||
| 02 | Gasket | 6 | 11611720740 | $7.71 | Shop at ECS Tuning | |||||
| 03 | Hex nut with plate | AM7 ZNNIV SI | X | 07129905541 | $0.64 | Shop at ECS Tuning | ||||
| 04 | Profile-gasket | 1 | 11611716174 | $15.02 | Shop at ECS Tuning | |||||
| 05 | Bracket front | 1 | 11611735265 | $5.52 | ENDED | Shop at ECS Tuning | ||||
| 06 | Bracket rear | 1 | 11611738759 | $5.52 | ENDED | Shop at ECS Tuning | ||||
| 07 | Hex bolt with washer | M6X20 | 2 | 07119904527 | $0.44 | Shop at ECS Tuning | ||||
| 08 | Hex bolt with washer | M8X16 | 2 | 07119905528 | $0.62 | Shop at ECS Tuning | ||||
| 09 | Connector | 1 | 02/1992 | 11611738629 | $5.42 | Shop at ECS Tuning | ||||
| 10 | O-ring | 24X3,5 | 1 | 11611730725 | $6.08 | ENDED | Shop at ECS Tuning | |||
| 11 | Connector | 1 | 02/1992 | 11611735800 | $5.42 | Shop at ECS Tuning | ||||
| 12 | O-ring | 9,12X3,53 | 1 | 02/1992 | 11611735859 | $1.19 | ENDED | Shop at ECS Tuning | ||
| 13 | Intake air temperature sensor | 1 | 09/1992 | 13621725324 | Shop at ECS Tuning | |||||
| 14 | Washer-gasket | 1 | 11/1990 | 11611735736 | $0.77 | Shop at ECS Tuning | ||||
| 15 | Gasket ring | 1 | 11/1990 | 11611735735 | $0.81 | Shop at ECS Tuning |
Notes
- ENDED = the part has been discontinued (no longer available).
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 3 Series E36 320i Intake manifold system?
- This technical diagram illustrates the Intake manifold system within the Engine group for the 3 Series E36 320i produced during 1992. It provides a detailed exploded view of the components, identifying key parts such as the Intake manifold (Part #11611738940).
- Which models use the hardware listed in this Intake manifold system?
- The hardware and components featured in the Intake manifold system are specific to the 3 Series E36 320i produced during 1992. These technical specifications ensure that parts like the Intake manifold (11611738940) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Intake manifold system assembly?
- Each item in the Intake manifold system corresponds to the numbered list below the illustration. For the 3 Series E36 320i, you can identify the Intake manifold by locating its position on the schematic, which then links to the official BMW part number 11611738940 for the Engine section.