Intake manifold system for BMW 3 Series E30 318i (1983)
This Intake manifold system technical drawing provides a detailed breakdown of the assembly for the 3 Series E30 318i. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 1983.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 01 | Intake manifold | 1 | 09/1983 | 11611709585 | $536.80 | ENDED | Shop at ECS Tuning | |||
| 02 | Stud bolt | M6X35-ZNS3 | 7 | 09/1983 | 07129903886 | Shop at ECS Tuning | ||||
| 03 | Gasket Asbestos Free | 1 | 09/1983 | 11611717286 | $2.42 | Shop at ECS Tuning | ||||
| 04 | Connection flange | 1 | 09/1983 | 02/1985 | 11611285398 | $14.89 | ENDED | Shop at ECS Tuning | ||
| 04 | Connection flange | 1 | 09/1983 | 11611709161 | Shop at ECS Tuning | |||||
| only in conjunction with | ||||||||||
| -- | Cap | D=3,5MM | 1 | 09/1983 | 11611437560 | $3.39 | Shop at ECS Tuning | |||
| 05 | Spring washer Black | B6-ZN | 3 | 09/1983 | 07119932073 | $0.38 | Shop at ECS Tuning | |||
| 07 | O-ring | 6.5X2.0 | 1 | 09/1983 | 11611254062 | $1.33 | ENDED | Shop at ECS Tuning | ||
| 08 | Starter valve | 1 | 09/1983 | 13641285087 | $166.37 | Shop at ECS Tuning | ||||
| 09 | Fillister-head screw | M6X10-8.8-ZNS3 | 2 | 09/1983 | 07/1987 | 07119902963 | $0.27 | ENDED | Shop at ECS Tuning | |
| 10 | Bracket | 1 | 09/1983 | 11611284779 | $1.96 | ENDED | Shop at ECS Tuning | |||
| 11 | Hex bolt | M6X12 | 1 | 09/1983 | 07119913442 | $0.25 | ENDED | Shop at ECS Tuning | ||
| 12 | Washer | 2 | 09/1983 | 11614000131 | $1.80 | ENDED | Shop at ECS Tuning | |||
| 13 | Hex nut wiht flange | M8 | 8 | 09/1983 | 11611713432 | $0.43 | ENDED | Shop at ECS Tuning | ||
| 14 | Wave washer | B8 | 7 | 09/1983 | 07/1987 | 07119932095 | $0.09 | ENDED | Shop at ECS Tuning | |
| 15 | Gasket Asbestos Free | 1 | 09/1983 | 11611727995 | $3.80 | Shop at ECS Tuning | ||||
| 16 | Gasket Asbestos Free | 3 | 09/1983 | 11611727994 | $3.80 | Shop at ECS Tuning | ||||
| 17 | Stud bolt | M6X25-ZN | 7 | 09/1983 | 07129908100 | $0.20 | Shop at ECS Tuning | |||
| 18 | Bracket | 1 | 09/1983 | 11611286373 | $1.40 | ENDED | Shop at ECS Tuning | |||
| 19 | Support | 1 | 09/1983 | 11611278747 | $15.62 | ENDED | Shop at ECS Tuning | |||
| 20 | Hex bolt | M8X25 | 1 | 09/1983 | 07119913653 | $0.47 | Shop at ECS Tuning | |||
| 21 | Holder | 1 | 09/1983 | 11611278739 | $10.04 | ENDED | Shop at ECS Tuning | |||
| 22 | Bracket | 1 | 09/1983 | 11631287382 | ENDED | Shop at ECS Tuning | ||||
| 22 | Bracket | 1 | 09/1983 | 11631287382 | ENDED | Shop at ECS Tuning | ||||
| 23 | Cap | D=3,5MM | 1 | 09/1983 | 11611437560 | $3.39 | Shop at ECS Tuning | |||
| 23 | Cap | D=3,5MM | 1 | 09/1983 | 11611437560 | $3.39 | Shop at ECS Tuning | |||
Notes
- ENDED = the part has been discontinued (no longer available).
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 3 Series E30 318i Intake manifold system?
- This technical diagram illustrates the Intake manifold system within the Engine group for the 3 Series E30 318i produced during 1983. It provides a detailed exploded view of the components, identifying key parts such as the Intake manifold (Part #11611709585).
- Which models use the hardware listed in this Intake manifold system?
- The hardware and components featured in the Intake manifold system are specific to the 3 Series E30 318i produced during 1983. These technical specifications ensure that parts like the Intake manifold (11611709585) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Intake manifold system assembly?
- Each item in the Intake manifold system corresponds to the numbered list below the illustration. For the 3 Series E30 318i, you can identify the Intake manifold by locating its position on the schematic, which then links to the official BMW part number 11611709585 for the Engine section.