Intake manifold for BMW 2500-3.3Li 3.0S (1976)
This Intake manifold technical drawing provides a detailed breakdown of the assembly for the 2500-3.3Li 3.0S. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 1976.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 01 | Holder | 1 | 11611251339 | ENDED | Shop at ECS Tuning | |||||
| 02 | Temperature switch | 1 | 05/1971 | 02/1977 | 61311355228 | $252.71 | Shop at ECS Tuning | |||
| 02 | Temperature switch | 65CEL | 1 | 09/1973 | 02/1977 | 61311354867 | $56.10 | Shop at ECS Tuning | ||
| 02 | Temperature switch | 45CEL | 1 | 09/1973 | 02/1977 | 61311357753 | $58.90 | ENDED | Shop at ECS Tuning | |
| For vehicles with National version sweden |
=Yes |
|||||||||
| 02 | Temperature switch | 1 | 08/1968 | 02/1977 | 61311355228 | $252.71 | Shop at ECS Tuning | |||
| 03 | Hex bolt | M6X30-8.8-ZNS3 | 4 | 07119904116 | $0.38 | Shop at ECS Tuning | ||||
| 04 | Wave washer | B6 | 4 | 07119932072 | $0.09 | ENDED | Shop at ECS Tuning | |||
| 06 | Gasket Asbestos Free | 1 | 11619065674 | $3.05 | Shop at ECS Tuning | |||||
Notes
- ENDED = the part has been discontinued (no longer available).
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 2500-3.3Li 3.0S Intake manifold?
- This technical diagram illustrates the Intake manifold within the Engine group for the 2500-3.3Li 3.0S produced during 1976. It provides a detailed exploded view of the components, identifying key parts such as the Holder (Part #11611251339).
- Which models use the hardware listed in this Intake manifold?
- The hardware and components featured in the Intake manifold are specific to the 2500-3.3Li 3.0S produced during 1976. These technical specifications ensure that parts like the Holder (11611251339) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Intake manifold assembly?
- Each item in the Intake manifold corresponds to the numbered list below the illustration. For the 2500-3.3Li 3.0S, you can identify the Holder by locating its position on the schematic, which then links to the official BMW part number 11611251339 for the Engine section.