Cylinder Head for BMW MINI Cabrio F57 One (2021)
This Cylinder Head technical drawing provides a detailed breakdown of the assembly for the MINI Cabrio F57 One. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 2021.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 01 | Cylinder head with valve gear | 1 | 01/2020 | 11121019163 | Shop at ECS Tuning | |||||
| only in conjunction with | ||||||||||
| -- | Dowel pin | 4X16MM | 1 | 01/2020 | 07119942082 | Shop at ECS Tuning | ||||
| 02 | Cylinder head gasket | 0,70MM | 1 | 11127934598 | Shop at ECS Tuning | |||||
| 02 | Cylinder head gasket | 1,00MM (+0,3) | 1 | 11127934599 | Shop at ECS Tuning | |||||
| 03 | Cylinder head bolt | M11X188 | 8 | 11128644674 | Shop at ECS Tuning | |||||
| 04 | Washer | 8 | 11127583138 | $6.05 | Shop at ECS Tuning | |||||
| 05 | ASA-Bolt | M8X40 | 5 | 07119907475 | Shop at ECS Tuning | |||||
| 06 | Air-discharge fitting with O-ring | 1 | 11128626622 | Shop at ECS Tuning | ||||||
| 07 | Actuator | 1 | 11378652738 | Shop at ECS Tuning | ||||||
| 08 | ISA screw | M6X16-8.8-ZNNIV | 2 | 07129905536 | $0.64 | Shop at ECS Tuning | ||||
| 09 | Dowel | D=12,5MM | 2 | 11121726241 | $1.62 | Shop at ECS Tuning | ||||
| 10 | Engine supporting bracket, right | 1 | 11128511299 | Shop at ECS Tuning | ||||||
| 11 | Star-socket screw | M10X45 | 3 | 07119908277 | Shop at ECS Tuning | |||||
| 12 | Loop | 1 | 11127638711 | Shop at ECS Tuning | ||||||
| 13 | Hex bolt with washer | M8X22 | 2 | 07119905739 | $0.62 | Shop at ECS Tuning | ||||
| 14 | Shaft seal | 1 | 11378662525 | Shop at ECS Tuning | ||||||
| 15 | Temperature sensor coolant / oil | 1 | 13627580635 | Shop at ECS Tuning | ||||||
| 16 | Dowel | D=7,5MM | 15 | 11127606504 | Shop at ECS Tuning | |||||
| Attention! Observe repair manual.Changed tightening process. |
||||||||||
| 17 | Countersunk screw | M6X35-8.8 | 18 | 07119907886 | Shop at ECS Tuning | |||||
| 17 | Countersunk screw | M6X35-10.9 | 15 | 07119909683 | Shop at ECS Tuning | |||||
| 18 | Countersunk screw | M6X65-8.8 | 4 | 07119907887 | Shop at ECS Tuning | |||||
| 18 | Countersunk screw | M6X65-10.9 | 7 | 07149844207 | Shop at ECS Tuning | |||||
See Also
Frequently Asked Questions
- What assembly is shown in the BMW MINI Cabrio F57 One Cylinder Head?
- This technical diagram illustrates the Cylinder Head within the Engine group for the MINI Cabrio F57 One produced during 2021. It provides a detailed exploded view of the components, identifying key parts such as the Cylinder head with valve gear (Part #11121019163).
- Which models use the hardware listed in this Cylinder Head?
- The hardware and components featured in the Cylinder Head are specific to the MINI Cabrio F57 One produced during 2021. These technical specifications ensure that parts like the Cylinder head with valve gear (11121019163) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Cylinder Head assembly?
- Each item in the Cylinder Head corresponds to the numbered list below the illustration. For the MINI Cabrio F57 One, you can identify the Cylinder head with valve gear by locating its position on the schematic, which then links to the official BMW part number 11121019163 for the Engine section.