Cylinder Head for BMW 5 Series G30 LCI 530iX (2022)
This Cylinder Head technical drawing provides a detailed breakdown of the assembly for the 5 Series G30 LCI 530iX. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 2022.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| For vehicles with Additional contents rde |
S1DZA=No |
|||||||||
| 01 | Cylinder head with valve gear | 1 | 01/2020 | 11121019167 | Shop at ECS Tuning | |||||
| only in conjunction with | ||||||||||
| -- | Dowel pin | 4X16MM | 2 | 01/2020 | 07119942082 | Shop at ECS Tuning | ||||
| For vehicles with Additional contents rde |
S1DZA=Yes |
|||||||||
| 01 | Cylinder head with valve gear | 1 | 01/2020 | 11121021715 | Shop at ECS Tuning | |||||
| only in conjunction with | ||||||||||
| -- | Dowel pin | 4X16MM | 2 | 01/2020 | 07119942082 | Shop at ECS Tuning | ||||
| 02 | Cylinder head gasket | 0,80MM | 1 | 11128481576 | Shop at ECS Tuning | |||||
| 02 | Cylinder head gasket | 1,10MM (+0,3) | 1 | 11128481577 | Shop at ECS Tuning | |||||
| 03 | Cylinder head bolt | M11X188 | 10 | 11128644674 | Shop at ECS Tuning | |||||
| 04 | Washer | 10 | 11127583138 | $6.05 | Shop at ECS Tuning | |||||
| 05 | ASA-Bolt | M8X40 | 5 | 07119907475 | Shop at ECS Tuning | |||||
| 06 | Air-discharge fitting with O-ring | 1 | 11128626622 | Shop at ECS Tuning | ||||||
| 07 | Actuator | 1 | 11378652738 | Shop at ECS Tuning | ||||||
| 08 | ISA screw | M6X16-8.8-ZNNIV | 2 | 07129905536 | $0.64 | Shop at ECS Tuning | ||||
| 09 | Shaft seal | 1 | 11378662525 | Shop at ECS Tuning | ||||||
| 10 | Loop | 1 | 11127638711 | Shop at ECS Tuning | ||||||
| 11 | Hex bolt with washer | M8X22 | 2 | 07119905739 | $0.62 | Shop at ECS Tuning | ||||
| 12 | Temperature sensor coolant / oil | 1 | 13627580635 | Shop at ECS Tuning | ||||||
| 13 | Dowel | D=7,5MM | 15 | 11127606504 | Shop at ECS Tuning | |||||
| Attention! Observe repair manual.Changed tightening process. |
||||||||||
| 14 | Countersunk screw | M6X35-8.8 | 22 | 07119907886 | Shop at ECS Tuning | |||||
| 14 | Countersunk screw | M6X35-10.9 | 18 | 07119909683 | Shop at ECS Tuning | |||||
| 15 | Countersunk screw | M6X65-8.8 | 5 | 07119907887 | Shop at ECS Tuning | |||||
| 15 | Countersunk screw | M6X65-10.9 | 9 | 07149844207 | Shop at ECS Tuning | |||||
| 17 | Part not available separately | 3 | 00000000000 | Shop at ECS Tuning | ||||||
| only in conjunction with | ||||||||||
| 17 | Screw plug | M28X1.5 | 3 | 11128697732 | Shop at ECS Tuning | |||||
| only in conjunction with | ||||||||||
| -- | Thread lock, medium-strength | 10ML | 4 | 83192210339 | Shop at ECS Tuning | |||||
| 18 | Cam follower | 1 | 11328629250 | Shop at ECS Tuning | ||||||
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 5 Series G30 LCI 530iX Cylinder Head?
- This technical diagram illustrates the Cylinder Head within the Engine group for the 5 Series G30 LCI 530iX produced during 2022. It provides a detailed exploded view of the components, identifying key parts such as the Cylinder head with valve gear (Part #11121019167).
- Which models use the hardware listed in this Cylinder Head?
- The hardware and components featured in the Cylinder Head are specific to the 5 Series G30 LCI 530iX produced during 2022. These technical specifications ensure that parts like the Cylinder head with valve gear (11121019167) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Cylinder Head assembly?
- Each item in the Cylinder Head corresponds to the numbered list below the illustration. For the 5 Series G30 LCI 530iX, you can identify the Cylinder head with valve gear by locating its position on the schematic, which then links to the official BMW part number 11121019167 for the Engine section.