Intake manifold system for BMW 3 Series E46 325xi (2001)
This Intake manifold system technical drawing provides a detailed breakdown of the assembly for the 3 Series E46 325xi. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 2001.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 01 | Intake manifold | 1 | 11617525752 | $615.48 | Shop at ECS Tuning | |||||
| 02 | Set of profile gaskets | 1 | 11611436631 | $63.30 | Shop at ECS Tuning | |||||
| 03 | Intake air temperature sensor | 1 | 13629899008 | Shop at ECS Tuning | ||||||
| 04 | O-ring | 8X3 | 1 | 13621743299 | $1.25 | Shop at ECS Tuning | ||||
| 05 | Distribution piece | 1 | 11611440318 | $58.23 | Shop at ECS Tuning | |||||
| 06 | O-ring | 7X3 | 6 | 11617502761 | $0.88 | Shop at ECS Tuning | ||||
| 07 | Adjuster unit | 1 | 11617544806 | $212.50 | Shop at ECS Tuning | |||||
| 08 | T-shape idle regulating valve | BOSCH | 1 | 13411744713 | $211.28 | Shop at ECS Tuning | ||||
| 09 | Bracket idle adjuster | 1 | 11617502271 | $14.98 | Shop at ECS Tuning | |||||
| 10 | Rubber grommet | 1 | 11611437453 | $20.65 | Shop at ECS Tuning | |||||
| 11 | Rubber Mounting | 1 | 11611432564 | $7.60 | Shop at ECS Tuning | |||||
| 12 | Torx-bolt with washer | M6X18 | 4 | 05/2016 | 11611440384 | $1.12 | ENDED | Shop at ECS Tuning | ||
| 12 | Torx-bolt with washer | M6X18 | 4 | 11617533344 | Shop at ECS Tuning | |||||
| 13 | Screw | K60X22 | 4 | 11617533331 | $0.75 | Shop at ECS Tuning | ||||
| 14 | Hex nut with plate | AM7 ZNNIV SI | 9 | 07129905541 | $0.64 | Shop at ECS Tuning | ||||
| 15 | Cap | D=3,5MM | 2 | 11611437560 | $3.39 | Shop at ECS Tuning | ||||
| 16 | Cap nut | M6 | 1 | 12421438388 | $0.63 | Shop at ECS Tuning | ||||
| 17 | Cap | D=7,0MM | 1 | 11611727176 | $3.39 | Shop at ECS Tuning |
Notes
- ENDED = the part has been discontinued (no longer available).
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 3 Series E46 325xi Intake manifold system?
- This technical diagram illustrates the Intake manifold system within the Engine group for the 3 Series E46 325xi produced during 2001. It provides a detailed exploded view of the components, identifying key parts such as the Intake manifold (Part #11617525752).
- Which models use the hardware listed in this Intake manifold system?
- The hardware and components featured in the Intake manifold system are specific to the 3 Series E46 325xi produced during 2001. These technical specifications ensure that parts like the Intake manifold (11617525752) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Intake manifold system assembly?
- Each item in the Intake manifold system corresponds to the numbered list below the illustration. For the 3 Series E46 325xi, you can identify the Intake manifold by locating its position on the schematic, which then links to the official BMW part number 11617525752 for the Engine section.