High pressure accumulator/injector/line for BMW 3 Series E92 330d (2008)
This High pressure accumulator/injector/line technical drawing provides a detailed breakdown of the assembly for the 3 Series E92 330d. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 2008.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 01 | Pressure accumulator | 1 | 13537805727 | $590.52 | Shop at ECS Tuning | |||||
| 02 | Pressure regulating valve | 1 | 13537805734 | $262.57 | Shop at ECS Tuning | |||||
| 03 | Pressure sensor | 1 | 13537787167 | $267.53 | Shop at ECS Tuning | |||||
| 04 | Connector | 1 | 13537805736 | $27.37 | Shop at ECS Tuning | |||||
| 04 | Part not available separately | 1 | 07/2023 | 00000000000 | Shop at ECS Tuning | |||||
| Order item 1 | ||||||||||
| 05 | Gasket ring | 2 | 13512248189 | $1.84 | Shop at ECS Tuning | |||||
| 06 | Hollow bolt | 1 | 13537807486 | $16.35 | Shop at ECS Tuning | |||||
| 07 | ISA screw | M8X25-10.9-ZNS3 | 3 | 07129904477 | $2.00 | Shop at ECS Tuning | ||||
| 08 | Injector | 6 | 11/2006 | 13537808089 | Shop at ECS Tuning | |||||
| 09 | O-ring | 6 | 13537794553 | $4.38 | Shop at ECS Tuning | |||||
| 10 | O-ring | 22X2 | 6 | 13537787236 | $3.75 | Shop at ECS Tuning | ||||
| 11 | Gasket ring | 6 | 13532247156 | $3.63 | Shop at ECS Tuning | |||||
| 12 | Flange | 6 | 13537792722 | $7.87 | Shop at ECS Tuning | |||||
| 13 | Flange nut | M6 | 12 | 13537801713 | $0.23 | Shop at ECS Tuning | ||||
| 14 | Pressure hose assy | 1 | 13537792947 | $28.62 | Shop at ECS Tuning | |||||
| 15 | Rubber Mounting | 1 | 13532248576 | $3.40 | Shop at ECS Tuning | |||||
| 16 | Pressure hose assy | 3 | 13537792717 | $22.60 | Shop at ECS Tuning | |||||
| 17 | Pressure hose assy | 3 | 13537792718 | $22.60 | Shop at ECS Tuning | |||||
| 18 | Socket housing 2 pins | 1 | 12527508153 | $2.53 | Shop at ECS Tuning | |||||
| only in conjunction with | ||||||||||
| -- | Socket terminal SLK 2.8 ELA with wire | 0,2- 0,5MM²/AG | 2 | 12520143427 | $2.03 | Shop at ECS Tuning | ||||
| -- | Socket terminal SLK 2.8 ELA | 0,22-0,35MM² AG | 2 | 12521427612 | $0.50 | SI 2 02 05(194) | Shop at ECS Tuning | |||
| -- | Single conductor seal | 0,75-1,0MM² | 2 | 12521748973 | $0.13 | Shop at ECS Tuning | ||||
| -- | Covering cap | 1 | 12517789973 | Shop at ECS Tuning | ||||||
| 19 | Plug housing | 3 POL. | 1 | 12527508154 | Shop at ECS Tuning | |||||
| only in conjunction with | ||||||||||
| -- | Single conductor seal | 1,0-2,5MM² | 3 | 12521748974 | $0.20 | Shop at ECS Tuning | ||||
| -- | Socket contact SLK 2,8 | 1,0-2,5 MM²/AG | 3 | 12527502933 | $0.50 | Shop at ECS Tuning | ||||
Notes
- SI = Service Information
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 3 Series E92 330d High pressure accumulator/injector/line?
- This technical diagram illustrates the High pressure accumulator/injector/line within the Fuel preparation system group for the 3 Series E92 330d produced during 2008. It provides a detailed exploded view of the components, identifying key parts such as the Pressure accumulator (Part #13537805727).
- Which models use the hardware listed in this High pressure accumulator/injector/line?
- The hardware and components featured in the High pressure accumulator/injector/line are specific to the 3 Series E92 330d produced during 2008. These technical specifications ensure that parts like the Pressure accumulator (13537805727) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the High pressure accumulator/injector/line assembly?
- Each item in the High pressure accumulator/injector/line corresponds to the numbered list below the illustration. For the 3 Series E92 330d, you can identify the Pressure accumulator by locating its position on the schematic, which then links to the official BMW part number 13537805727 for the Fuel preparation system section.