Fuel tank/attaching parts for BMW 3 Series E46 325ti (2004)
This Fuel tank/attaching parts technical drawing provides a detailed breakdown of the assembly for the 3 Series E46 325ti. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 2004.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 01 | Plastic fuel tank with left sensor | 1 | 16116766940 | $430.25 | ENDED | Shop at ECS Tuning | ||||
| 02 | Tension strap | 2 | 16116756583 | $26.17 | Shop at ECS Tuning | |||||
| 03 | Damper rubber | 2 | 16111184018 | $17.35 | Shop at ECS Tuning | |||||
| 04 | Rubber grommet | 2 | 16111182454 | $0.93 | Shop at ECS Tuning | |||||
| 05 | Spacer sleeve | 2 | 16117194458 | $3.23 | Shop at ECS Tuning | |||||
| 06 | Hex bolt with washer | M8X30-ZNNIV SI | 2 | 07119905532 | $1.25 | Shop at ECS Tuning | ||||
| 07 | Hex nut | M8-8-ZNS3 | 1 | 07146760121 | $1.09 | Shop at ECS Tuning | ||||
| 08 | Fuel vent pipe | 1 | 16117176552 | $50.70 | +core | Shop at ECS Tuning | ||||
| 09 | Plastic filler pipe | 1 | 16116757657 | Shop at ECS Tuning | ||||||
| For vehicles with Equipment for leaded fuel |
S199A=Yes |
|||||||||
| 09 | Plastic filler pipe | 1 | 16116757660 | ENDED, +core | Shop at ECS Tuning | |||||
| 10 | Plastic nut | 1 | 51711958025 | $0.26 | Shop at ECS Tuning | |||||
| 11 | Hose clamp | L42-48 | 2 | 07129952119 | $1.15 | Shop at ECS Tuning | ||||
| 12 | Filler cap | 1 | 16117193372 | Shop at ECS Tuning | ||||||
| 13 | Filler cap pin | 1 | 16111184156 | $0.62 | ENDED | Shop at ECS Tuning | ||||
| 14 | Rubber seal | 1 | 16116755071 | $1.92 | ENDED | Shop at ECS Tuning | ||||
| 15 | Hose clamp | 23,9-27,1 | 3 | 11631716970 | $0.79 | Shop at ECS Tuning | ||||
| 16 | Hose clamp | L12-15 | 2 | 07129952104 | $1.18 | Shop at ECS Tuning | ||||
| 17 | Fuel hose | 40X47X170 | 1 | 16117176011 | $33.30 | Shop at ECS Tuning | ||||
| For vehicles with without catalytic converter |
S199A=Yes |
|||||||||
| 17 | Fuel hose | 40X47X170 | 1 | 16111183758 | Shop at ECS Tuning | |||||
| 18 | Fuel hose | X | 16111182825 | $47.67 | Shop at ECS Tuning | |||||
| For vehicles with Equipment for leaded fuel |
S199A=Yes |
|||||||||
| 18 | Fuel hose | D=18X24MM | X | 16111183740 | ENDED | Shop at ECS Tuning | ||||
| 23 | Holding strap | 1 | 16116754637 | Shop at ECS Tuning | ||||||
| only applies to | ||||||||||
| -- | Filler cap | X | 16117193372 | Shop at ECS Tuning | ||||||
Notes
- ENDED = the part has been discontinued (no longer available).
- +core = plus core charge (possibility of a return of the old part)
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 3 Series E46 325ti Fuel tank/attaching parts?
- This technical diagram illustrates the Fuel tank/attaching parts within the Fuel Supply group for the 3 Series E46 325ti produced during 2004. It provides a detailed exploded view of the components, identifying key parts such as the Plastic fuel tank with left sensor (Part #16116766940).
- Which models use the hardware listed in this Fuel tank/attaching parts?
- The hardware and components featured in the Fuel tank/attaching parts are specific to the 3 Series E46 325ti produced during 2004. These technical specifications ensure that parts like the Plastic fuel tank with left sensor (16116766940) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Fuel tank/attaching parts assembly?
- Each item in the Fuel tank/attaching parts corresponds to the numbered list below the illustration. For the 3 Series E46 325ti, you can identify the Plastic fuel tank with left sensor by locating its position on the schematic, which then links to the official BMW part number 16116766940 for the Fuel Supply section.