Exhaust system, rear for BMW 3 Series E90 325xi (2008)
This Exhaust system, rear technical drawing provides a detailed breakdown of the assembly for the 3 Series E90 325xi. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 2008.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| i | For mounting retainer, body side further information see HG 41 |
|||||||||
| 01 | Exhaust pipes with primary silencer | 1 | 18307647127 | Shop at ECS Tuning | ||||||
| 02 | Rear muffler | 1 | 09/2007 | 18307647128 | Shop at ECS Tuning | |||||
| 03 | Flat gasket | 2 | 18107549447 | $14.36 | Shop at ECS Tuning | |||||
| Required for repair | ||||||||||
| -- | Hex nut | M10 | 4 | 18301737774 | $1.65 | Shop at ECS Tuning | ||||
| For vehicles with Automatic transmission |
S205A=Yes |
|||||||||
| 04 | Flange steady | 1 | 18307541458 | $5.68 | Shop at ECS Tuning | |||||
| 05 | Hex nut | M10 | 4 | 18301737774 | $1.65 | Shop at ECS Tuning | ||||
| 06 | Pipe clamp, top | 1 | 18307534095 | $10.71 | Shop at ECS Tuning | |||||
| 07 | Pipe clamp, bottom | 1 | 18307534096 | $10.71 | Shop at ECS Tuning | |||||
| 08 | Hexagon screw with flange | M8X45 | 1 | 18307552793 | $2.12 | Shop at ECS Tuning | ||||
| 09 | Torx screw with collar | M8X49 | 1 | 18207544250 | $4.20 | Shop at ECS Tuning | ||||
| 10 | Bracket | 1 | 18207540178 | $28.63 | Shop at ECS Tuning | |||||
| 11 | Joint sleeve | D=8MM | 4 | 18207546579 | $2.86 | Shop at ECS Tuning | ||||
| 12 | Gearbox support | 1 | 18207527635 | $29.05 | Shop at ECS Tuning | |||||
| 13 | Clamp | 1 | 18207524535 | $7.47 | Shop at ECS Tuning | |||||
| 14 | ASA-Bolt | M8X20-U1-8.8 | 2 | 07129904559 | $0.71 | Shop at ECS Tuning | ||||
| 16 | Holder | 1 | 18207549977 | $22.83 | Shop at ECS Tuning | |||||
| 17 | Rubber Mounting | 3 | 18207590154 | Shop at ECS Tuning | ||||||
| 18 | Hex nut | M12X1,5ZNNIV SI | 1 | 07129904866 | $1.85 | Shop at ECS Tuning | ||||
| 19 | Clamping bush | D=65 X 70MM | 1 | 18307536426 | $50.38 | Shop at ECS Tuning | ||||
| 20 | Vibration absorber | 32 HZ | 1 | 18303413587 | $54.00 | Shop at ECS Tuning | ||||
| 21 | Collar screw | M8X70 | 1 | 18407540023 | $4.07 | Shop at ECS Tuning | ||||
| 22 | Holder | 1 | 18307526848 | $17.63 | Shop at ECS Tuning | |||||
| 23 | Flange nut | M8 | 1 | 07143413174 | $0.36 | Shop at ECS Tuning | ||||
| 24 | Holder | 1 | 18207526850 | $22.83 | Shop at ECS Tuning | |||||
| 25 | Torx-bolt with washer | ASA M8X25 | 1 | 51217062145 | $1.17 | Shop at ECS Tuning | ||||
| 25 | ASA-Bolt | M8X20-U1-8.8 | 2 | 07129904559 | $0.71 | Shop at ECS Tuning | ||||
| 26 | Tailpipe end piece, alu-look | 1 | 09/2006 | 18307553643 | $54.00 | Shop at ECS Tuning | ||||
| 27 | Tailpipe end piece, alu-look | 1 | 09/2006 | 18307553644 | $54.00 | Shop at ECS Tuning | ||||
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 3 Series E90 325xi Exhaust system, rear?
- This technical diagram illustrates the Exhaust system, rear within the Exhaust system group for the 3 Series E90 325xi produced during 2008. It provides a detailed exploded view of the components, identifying key parts such as the Exhaust pipes with primary silencer (Part #18307647127).
- Which models use the hardware listed in this Exhaust system, rear?
- The hardware and components featured in the Exhaust system, rear are specific to the 3 Series E90 325xi produced during 2008. These technical specifications ensure that parts like the Exhaust pipes with primary silencer (18307647127) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Exhaust system, rear assembly?
- Each item in the Exhaust system, rear corresponds to the numbered list below the illustration. For the 3 Series E90 325xi, you can identify the Exhaust pipes with primary silencer by locating its position on the schematic, which then links to the official BMW part number 18307647127 for the Exhaust system section.