Drive shaft,univ.joint/center mounting for BMW 3 Series E30 325e (1987)
This Drive shaft,univ.joint/center mounting technical drawing provides a detailed breakdown of the assembly for the 3 Series E30 325e. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 1987.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 01 | Centering sleeve | 1 | 26117526611 | $11.32 | Shop at ECS Tuning | |||||
| 02 | Universal joint | LK=96MM/12 | 1 | 05/1986 | 26117511454 | $120.93 | Shop at ECS Tuning | |||
| LK = bolt hole | ||||||||||
| 03 | Vibration damper | 1 | 23131220584 | $227.98 | Shop at ECS Tuning | |||||
| 05 | Knurled bolt | M10X53 | 3 | 23111224433 | $11.14 | Shop at ECS Tuning | ||||
| 07 | Self-locking hex nut | M10 | 6 | 07129964672 | $0.36 | Shop at ECS Tuning | ||||
| 08 | Dust protection | 1 | 26111225089 | $2.67 | Shop at ECS Tuning | |||||
| 09 | Grooved ball bearing | D=55/D=30 | 1 | 26121225071 | $26.16 | Shop at ECS Tuning | ||||
| 10 | Center Mount | 55X13X30 | 1 | 09/1987 | 26121225152 | $90.77 | Shop at ECS Tuning | |||
| 11 | Hex bolt with washer | M8X22-SB-Z4 | 2 | 07119915160 | ENDED | Shop at ECS Tuning | ||||
| 12 | Washer | 8,4X16X1,6-ZNNV | 2 | 07119907030 | Shop at ECS Tuning | |||||
| 13 | Hex nut | M8-8-ZNNIV SI | 2 | 07119905515 | $0.16 | Shop at ECS Tuning | ||||
| 14 | Dustcover plate | D=30X58X5,5-CRH | 1 | 26111225088 | $3.08 | Shop at ECS Tuning | ||||
| 15 | Lock Ring | 1 | 26123648156 | $0.98 | Shop at ECS Tuning | |||||
| 16 | Threaded ring with clamp-ring | 1 | 26117514037 | $12.52 | Shop at ECS Tuning | |||||
| 17 | Tooth washer | 1 | 26111209285 | $2.73 | Shop at ECS Tuning | |||||
| 18 | Threaded ring with clamp-ring | 1 | 26117514037 | $12.52 | Shop at ECS Tuning | |||||
| 19 | Knurled bolt | M10X25 | 4 | 26111206718 | $2.18 | Shop at ECS Tuning | ||||
| 20 | Self-locking hex nut | M10 | 4 | 07129964672 | $0.36 | Shop at ECS Tuning | ||||
Notes
- ENDED = the part has been discontinued (no longer available).
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 3 Series E30 325e Drive shaft,univ.joint/center mounting?
- This technical diagram illustrates the Drive shaft,univ.joint/center mounting within the Drive Shaft group for the 3 Series E30 325e produced during 1987. It provides a detailed exploded view of the components, identifying key parts such as the Centering sleeve (Part #26117526611).
- Which models use the hardware listed in this Drive shaft,univ.joint/center mounting?
- The hardware and components featured in the Drive shaft,univ.joint/center mounting are specific to the 3 Series E30 325e produced during 1987. These technical specifications ensure that parts like the Centering sleeve (26117526611) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Drive shaft,univ.joint/center mounting assembly?
- Each item in the Drive shaft,univ.joint/center mounting corresponds to the numbered list below the illustration. For the 3 Series E30 325e, you can identify the Centering sleeve by locating its position on the schematic, which then links to the official BMW part number 26117526611 for the Drive Shaft section.