Hydro steering box - worm gear/mounting for BMW 6 Series E24 633CSi (1979)
This Hydro steering box - worm gear/mounting technical drawing provides a detailed breakdown of the assembly for the 6 Series E24 633CSi. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 1979.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 01 | Worm with piston | 1 | 09/1982 | 32131111875 | ENDED | Shop at ECS Tuning | ||||
| 02 | Adjuster | 2 | 09/1982 | 32131111872 | ENDED | Shop at ECS Tuning | ||||
| 03 | Washer | 2 | 09/1982 | 32131111876 | ENDED | Shop at ECS Tuning | ||||
| 04 | Compression spring | 2 | 09/1982 | 32131111878 | ENDED | Shop at ECS Tuning | ||||
| 05 | Compression spring | 2 | 09/1982 | 32131111879 | ENDED | Shop at ECS Tuning | ||||
| 06 | Diaphragm spring | 2 | 09/1982 | 32131111877 | ENDED | Shop at ECS Tuning | ||||
| 07 | Holder | 1 | 09/1982 | 32131111880 | ENDED | Shop at ECS Tuning | ||||
| 08 | Hex nut | M3 | 2 | 09/1982 | 07119922016 | $0.09 | Shop at ECS Tuning | |||
| 09 | Securing plate | 1 | 09/1982 | 32131111881 | ENDED | Shop at ECS Tuning | ||||
| 10 | Hex bolt | M5X15 | 1 | 09/1982 | 07119913235 | $3.51 | ENDED | Shop at ECS Tuning | ||
| 11 | O-ring | 3 | 09/1982 | 32131104790 | $1.71 | ENDED | Shop at ECS Tuning | |||
| 12 | Gasket ring | 3 | 09/1982 | 32131104789 | $3.52 | ENDED | Shop at ECS Tuning | |||
| 13 | Needle cage | 0,000-0,002 MM | 1 | 09/1982 | 32131104791 | $8.93 | ENDED | Shop at ECS Tuning | ||
| 13 | Needle cage | 0,002-0,004 MM | 1 | 09/1982 | 32131104792 | ENDED | Shop at ECS Tuning | |||
| 13 | Needle cage | 0,004-0,006 MM | 1 | 09/1982 | 32131104793 | ENDED | Shop at ECS Tuning | |||
| 13 | Needle cage | 0,006-0,008 MM | 1 | 09/1982 | 32131104794 | ENDED | Shop at ECS Tuning | |||
| 14 | Guide ring | D=28,000 MM | 1 | 09/1982 | 32131104795 | ENDED | Shop at ECS Tuning | |||
| 14 | Guide ring | D=28,015 MM | 1 | 09/1982 | 32131104796 | ENDED | Shop at ECS Tuning | |||
| 15 | Bearing ball cage | 1 | 09/1982 | 32131104801 | $6.81 | ENDED | Shop at ECS Tuning | |||
| 16 | Guide ring | 1 | 09/1982 | 32131104835 | $27.62 | ENDED | Shop at ECS Tuning | |||
| 17 | Shaft seal | 1 | 09/1982 | 32131128686 | $12.81 | ENDED | Shop at ECS Tuning | |||
| 18 | Valve housing | 1 | 09/1982 | 32131104833 | ENDED | Shop at ECS Tuning | ||||
| 19 | Washer | 4 | 09/1982 | 32131104786 | ENDED | Shop at ECS Tuning | ||||
| 20 | Hex bolt | M8X75 | 4 | 09/1982 | 07119912549 | ENDED | Shop at ECS Tuning | |||
| 21 | Protection cap | 1 | 09/1982 | 32131126931 | $2.73 | Shop at ECS Tuning |
Notes
- ENDED = the part has been discontinued (no longer available).
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 6 Series E24 633CSi Hydro steering box - worm gear/mounting?
- This technical diagram illustrates the Hydro steering box - worm gear/mounting within the Steering group for the 6 Series E24 633CSi produced during 1979. It provides a detailed exploded view of the components, identifying key parts such as the Worm with piston (Part #32131111875).
- Which models use the hardware listed in this Hydro steering box - worm gear/mounting?
- The hardware and components featured in the Hydro steering box - worm gear/mounting are specific to the 6 Series E24 633CSi produced during 1979. These technical specifications ensure that parts like the Worm with piston (32131111875) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Hydro steering box - worm gear/mounting assembly?
- Each item in the Hydro steering box - worm gear/mounting corresponds to the numbered list below the illustration. For the 6 Series E24 633CSi, you can identify the Worm with piston by locating its position on the schematic, which then links to the official BMW part number 32131111875 for the Steering section.