Final drive cover/trigger contact for BMW 3 Series E30 320i (1991)
This Final drive cover/trigger contact technical drawing provides a detailed breakdown of the assembly for the 3 Series E30 320i. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 1991.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| i | TRANSMISSION HOUSING REFER TO AT-Final drive For vehicles with National version japan |
L807A=Yes |
||||||||
| 02 | Transmission cover | 1 | 33111210424 | $126.68 | Shop at ECS Tuning | |||||
| 03 | Gasket Asbestos Free | TYP 168 | 1 | 33111210428 | $1.73 | Shop at ECS Tuning | ||||
| 04 | Wave washer | B10-ZNS3 | 5 | 07119904463 | Shop at ECS Tuning | |||||
| 05 | Hex bolt | M10X25 8.8 | 4 | 07119908569 | Shop at ECS Tuning | |||||
| 05 | Hex bolt | M10X25-8.8 ZN | 4 | 07119913834 | $0.71 | Shop at ECS Tuning | ||||
| 05 | Hex bolt | M10X80 | 2 | 07119921540 | $1.64 | Shop at ECS Tuning | ||||
| 05 | Hex bolt | M10X80 | 2 | 31111136251 | $1.11 | ENDED | Shop at ECS Tuning | |||
| 06 | Gasket ring | A22X27-AL | 2 | 07119963355 | $0.36 | Shop at ECS Tuning | ||||
| 07 | Screw plug with O-ring | M22X1,5-ZNS3 | 2 | 33117525064 | $3.91 | Shop at ECS Tuning | ||||
| 08 | Pulse generator, speedometer | 1 | 09/1987 | 62168355008 | $29.23 | Shop at ECS Tuning | ||||
| 09 | O-ring | 1 | 33111210739 | Shop at ECS Tuning | ||||||
| 10 | Bracket | 1 | 33111206076 | $2.65 | Shop at ECS Tuning | |||||
| 11 | Securing plate | 1 | 62161365817 | $15.34 | Shop at ECS Tuning | |||||
| 12 | Hex bolt | M6X10-8.8-ZNS3 | 2 | 07119904633 | $0.20 | Shop at ECS Tuning | ||||
| 12 | Hex bolt | M6X10 | 2 | 07119913522 | ENDED | Shop at ECS Tuning | ||||
| 13 | Rubber Mounting | 1 | 33171128586 | $67.52 | ENDED | Shop at ECS Tuning | ||||
| 13 | Rubber Mounting | 1 | 33171135242 | $67.39 | Shop at ECS Tuning | |||||
| 14 | Hex bolt | M12X1,5X55 | 1 | 07119914636 | ENDED | Shop at ECS Tuning | ||||
| 15 | Washer | A13/HV-ZNS | 2 | 05/1991 | 07119901766 | $0.30 | ENDED | Shop at ECS Tuning | ||
| 15 | Washer | 12-300 HV-ZNS3 | 2 | 07119904119 | $0.25 | Shop at ECS Tuning | ||||
| 16 | Self-locking hex nut | M12X1,5-10-PHR | 1 | 07129900047 | $0.62 | Shop at ECS Tuning | ||||
| 17 | Washer | A12.5X30X3MM | 4 | 33331120662 | $0.35 | ENDED | Shop at ECS Tuning | |||
| 18 | Hex bolt | M12X1,5X25 | 4 | 07119911694 | $0.82 | Shop at ECS Tuning | ||||
Notes
- ENDED = the part has been discontinued (no longer available).
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 3 Series E30 320i Final drive cover/trigger contact?
- This technical diagram illustrates the Final drive cover/trigger contact within the Rear Axle group for the 3 Series E30 320i produced during 1991. It provides a detailed exploded view of the components, identifying key parts such as the Transmission cover (Part #33111210424).
- Which models use the hardware listed in this Final drive cover/trigger contact?
- The hardware and components featured in the Final drive cover/trigger contact are specific to the 3 Series E30 320i produced during 1991. These technical specifications ensure that parts like the Transmission cover (33111210424) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Final drive cover/trigger contact assembly?
- Each item in the Final drive cover/trigger contact corresponds to the numbered list below the illustration. For the 3 Series E30 320i, you can identify the Transmission cover by locating its position on the schematic, which then links to the official BMW part number 33111210424 for the Rear Axle section.