Stabilizer, rear for BMW 3 Series E30 318i (1987)
This Stabilizer, rear technical drawing provides a detailed breakdown of the assembly for the 3 Series E30 318i. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 1987.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| ONLY APPLIES TO BILSTEIN | ||||||||||
| 01 | Stabilizer, rear | D=14,5MM | 1 | 03/1985 | 33551129194 | $202.17 | Shop at ECS Tuning | |||
| 01 | Stabilizer, rear | D=14,5MM | 1 | 03/1985 | 33551129194 | $202.17 | Shop at ECS Tuning | |||
| For vehicles with National version italy ONLY APPLIES TO F+S GAS |
L814A=Yes |
|||||||||
| 01 | Stabilizer, rear | D=13,5MM | 1 | 33551129192 | $157.36 | Shop at ECS Tuning | ||||
| For vehicles with Sport suspension |
=Yes |
|||||||||
| 01 | Stabilizer, rear | D=12MM | 1 | 33551127344 | $128.43 | ENDED | Shop at ECS Tuning | |||
| For vehicles with Sport suspension and M technic |
=Yes =Yes |
|||||||||
| 01 | Stabilizer, rear | D=14,5MM | 1 | 33551129194 | $202.17 | Shop at ECS Tuning | ||||
| For vehicles with National version italy ONLY APPLIES TO F+S GAS |
L814A=Yes |
|||||||||
| 02 | Stabilizer rubber mounting | D=13,5MM | 2 | 33551131290 | $5.46 | Shop at ECS Tuning | ||||
| For vehicles with Sport suspension |
=Yes |
|||||||||
| 02 | Stabilizer rubber mounting | D=12MM | 2 | 33551129677 | $10.36 | Shop at ECS Tuning | ||||
| For vehicles with Sport suspension and M technic |
=Yes =Yes |
|||||||||
| 02 | Stabilizer rubber mounting | D=14,5MM | 2 | 33551130349 | $5.46 | Shop at ECS Tuning | ||||
| 03 | Stabilizer support | 2 | 33551129195 | $1.52 | Shop at ECS Tuning | |||||
| 04 | Hex bolt with washer | M8X16-Z3 | 2 | 07119915066 | $0.62 | Shop at ECS Tuning | ||||
| 05 | Stabilizer link | 2 | 33551124375 | Shop at ECS Tuning | ||||||
| Required for repair | ||||||||||
| -- | Hex bolt | M8X45-8.8-ZNS3 | 2 | 07119902955 | $0.62 | Shop at ECS Tuning | ||||
| -- | Self-locking hex nut | M8 | 2 | 07129922716 | $0.36 | Shop at ECS Tuning | ||||
| 06 | Hex bolt | M8X43-8.8-ZNS3 | 2 | 07119903076 | $0.71 | Shop at ECS Tuning | ||||
| 07 | Self-locking hex nut | M8-8-ZNNI SI | 2 | 07129906196 | $1.60 | Shop at ECS Tuning | ||||
| 08 | Shim | 18X12X1 | 2 | 07119932631 | $0.92 | Shop at ECS Tuning | ||||
| 09 | Split pin | 3,2X25 | 2 | 07119945196 | $0.09 | ENDED | Shop at ECS Tuning | |||
| 10 | Swing support bracket | 2 | 33321127717 | $3.22 | Shop at ECS Tuning | |||||
| 11 | Self-locking collar nut | M8-8-ZNS3 | 2 | 07119904295 | $0.36 | Shop at ECS Tuning | ||||
| 11 | Self-locking collar nut | M8-10 ZNS3 | 2 | 07119905374 | Shop at ECS Tuning | |||||
Notes
- ENDED = the part has been discontinued (no longer available).
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 3 Series E30 318i Stabilizer, rear?
- This technical diagram illustrates the Stabilizer, rear within the Rear Axle group for the 3 Series E30 318i produced during 1987. It provides a detailed exploded view of the components, identifying key parts such as the Stabilizer, rear (Part #33551129194).
- Which models use the hardware listed in this Stabilizer, rear?
- The hardware and components featured in the Stabilizer, rear are specific to the 3 Series E30 318i produced during 1987. These technical specifications ensure that parts like the Stabilizer, rear (33551129194) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Stabilizer, rear assembly?
- Each item in the Stabilizer, rear corresponds to the numbered list below the illustration. For the 3 Series E30 318i, you can identify the Stabilizer, rear by locating its position on the schematic, which then links to the official BMW part number 33551129194 for the Rear Axle section.