Stabilizer, rear for BMW 3 Series E30 316i (1991)
This Stabilizer, rear technical drawing provides a detailed breakdown of the assembly for the 3 Series E30 316i. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 1991.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 01 | Stabilizer | 1 | 33552903447 | Shop at ECS Tuning | ||||||
| 02 | Stabilizer rubber mounting | D=12MM | 2 | 33551129677 | $10.36 | Shop at ECS Tuning | ||||
| 03 | Stabilizer support | 2 | 33551129195 | $1.52 | Shop at ECS Tuning | |||||
| 04 | Hex bolt with washer | M8X16-Z3 | 2 | 07119915066 | $0.62 | Shop at ECS Tuning | ||||
| 05 | Stabilizer link | 2 | 33551124375 | Shop at ECS Tuning | ||||||
| Required for repair | ||||||||||
| -- | Hex bolt | M8X45-8.8-ZNS3 | 2 | 07119902955 | $0.62 | Shop at ECS Tuning | ||||
| -- | Self-locking hex nut | M8 | 2 | 07129922716 | $0.36 | Shop at ECS Tuning | ||||
| 06 | Hex bolt | M8X43-8.8-ZNS3 | 2 | 07119903076 | $0.71 | Shop at ECS Tuning | ||||
| 07 | Self-locking hex nut | M8-8-ZNNI SI | 2 | 07129906196 | $1.60 | Shop at ECS Tuning | ||||
| 08 | Shim | 18X12X1 | 2 | 07119932631 | $0.92 | Shop at ECS Tuning | ||||
| 09 | Split pin | 3,2X25 | 2 | 07119945196 | $0.09 | ENDED | Shop at ECS Tuning | |||
| 10 | Swing support bracket | 2 | 33321127717 | $3.22 | Shop at ECS Tuning | |||||
| 11 | Self-locking collar nut | M8-8-ZNS3 | 2 | 07119904295 | $0.36 | Shop at ECS Tuning | ||||
| 11 | Self-locking collar nut | M8-10 ZNS3 | 2 | 07119905374 | Shop at ECS Tuning | |||||
Notes
- ENDED = the part has been discontinued (no longer available).
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 3 Series E30 316i Stabilizer, rear?
- This technical diagram illustrates the Stabilizer, rear within the Rear Axle group for the 3 Series E30 316i produced during 1991. It provides a detailed exploded view of the components, identifying key parts such as the Stabilizer (Part #33552903447).
- Which models use the hardware listed in this Stabilizer, rear?
- The hardware and components featured in the Stabilizer, rear are specific to the 3 Series E30 316i produced during 1991. These technical specifications ensure that parts like the Stabilizer (33552903447) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Stabilizer, rear assembly?
- Each item in the Stabilizer, rear corresponds to the numbered list below the illustration. For the 3 Series E30 316i, you can identify the Stabilizer by locating its position on the schematic, which then links to the official BMW part number 33552903447 for the Rear Axle section.