Drive flange suspension/gasket ring for BMW 5 Series E28 535i (1987)
This Drive flange suspension/gasket ring technical drawing provides a detailed breakdown of the assembly for the 5 Series E28 535i. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 1987.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 01 | Drive flange | 1 | 33121207348 | $128.34 | ENDED | Shop at ECS Tuning | ||||
| 02 | Dustcover plate | 1 | 33137600693 | Shop at ECS Tuning | ||||||
| For vehicles with National version Australia |
L810A=Yes |
|||||||||
| 02 | Dustcover plate | 81MM | 1 | 33121200284 | $2.38 | Shop at ECS Tuning | ||||
| 03 | Securing plate | 1 | 33121205138 | $1.33 | Shop at ECS Tuning | |||||
| For vehicles with National version Australia |
L810A=Yes |
|||||||||
| 03 | Securing plate | 1 | 23211490120 | $1.43 | Shop at ECS Tuning | |||||
| 05 | Shaft seal | 50X80X9 | 1 | 33121213949 | $40.15 | Shop at ECS Tuning | ||||
| For vehicles with National version Australia |
L810A=Yes |
|||||||||
| 05 | Shaft seal | 45X75X10 AW 188 | 1 | 31507609535 | Shop at ECS Tuning | |||||
| 06 | Tapered roller bearing | 1 | 33121206294 | Shop at ECS Tuning | ||||||
| For vehicles with National version Australia |
L810A=Yes |
|||||||||
| 06 | Tapered roller bearing | 31,7X73,0X29,3 | 1 | 33121204312 | Shop at ECS Tuning | |||||
| 07 | Tapered roller bearing | 44,4X88,9X30,1 | 1 | 33121204407 | $83.67 | Shop at ECS Tuning | ||||
| For vehicles with National version Australia |
L810A=Yes |
|||||||||
| 07 | Tapered roller bearing | 1 | 33121204315 | Shop at ECS Tuning | ||||||
| 08 | Clamping bush | 1 | 33121204657 | $7.93 | Shop at ECS Tuning | |||||
| For vehicles with National version Australia |
L810A=Yes |
|||||||||
| 08 | Clamping bush | 1 | 33121744368 | $9.14 | Shop at ECS Tuning | |||||
| 09 | Spacer rings set | 3,205MM-3,475MM | 1 | 33129065173 | $35.00 | Shop at ECS Tuning | ||||
| 09 | Spacer rings set | 3,505MM-3,685MM | 1 | 33129065174 | $36.42 | Shop at ECS Tuning | ||||
| 09 | Spacer rings set | 3,695MM-3,785MM | 1 | 33129065175 | $36.42 | Shop at ECS Tuning | ||||
| 09 | Spacer rings set | 3,795MM-3,955MM | 1 | 33129065176 | $36.42 | Shop at ECS Tuning | ||||
| 09 | Spacer rings set | 3,985MM-4,285MM | 1 | 33129065177 | $36.42 | ENDED | Shop at ECS Tuning | |||
| For vehicles with National version Australia |
L810A=Yes |
|||||||||
| 09 | Spacer rings set | 3,255MM-3,435MM | 1 | 33129065179 | $36.42 | Shop at ECS Tuning | ||||
Notes
- ENDED = the part has been discontinued (no longer available).
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 5 Series E28 535i Drive flange suspension/gasket ring?
- This technical diagram illustrates the Drive flange suspension/gasket ring within the Rear Axle group for the 5 Series E28 535i produced during 1987. It provides a detailed exploded view of the components, identifying key parts such as the Drive flange (Part #33121207348).
- Which models use the hardware listed in this Drive flange suspension/gasket ring?
- The hardware and components featured in the Drive flange suspension/gasket ring are specific to the 5 Series E28 535i produced during 1987. These technical specifications ensure that parts like the Drive flange (33121207348) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Drive flange suspension/gasket ring assembly?
- Each item in the Drive flange suspension/gasket ring corresponds to the numbered list below the illustration. For the 5 Series E28 535i, you can identify the Drive flange by locating its position on the schematic, which then links to the official BMW part number 33121207348 for the Rear Axle section.