Levelling device/tubing rear for BMW 2500-3.3Li 2800 (1973)
This Levelling device/tubing rear technical drawing provides a detailed breakdown of the assembly for the 2500-3.3Li 2800. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 1973.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| For vehicles with Self-levelling suspension |
=Yes |
|||||||||
| 01 | Pressure hose assy | 2 | 37121112830 | $67.37 | ENDED | Shop at ECS Tuning | ||||
| 02 | Hex bolt | M6X16-8.8-ZNS3 | 2 | 07119904357 | $0.36 | Shop at ECS Tuning | ||||
| 03 | Clamp | 1 | 37121112451 | ENDED | Shop at ECS Tuning | |||||
| 04 | Lever | 1 | 37121124163 | $5.47 | ENDED | Shop at ECS Tuning | ||||
| 05 | Self-locking hex nut | M6-10 ZN | 1 | 02/1977 | 07129922705 | $0.27 | ENDED | Shop at ECS Tuning | ||
| 05 | Self-locking hex nut | M6 ZNNIV SI | 1 | 07147575163 | $0.25 | Shop at ECS Tuning | ||||
| 06 | Washer | 2 | 35414640245 | ENDED | Shop at ECS Tuning | |||||
| 07 | Pipe | M10/M10-829MM | 1 | 34326755594 | $8.65 | Shop at ECS Tuning | ||||
| 08 | Pull rod | 1 | 37121113391 | ENDED | Shop at ECS Tuning | |||||
| 09 | Distribution piece | M10X1 | 1 | 10/2003 | 34331163566 | $8.78 | ENDED | Shop at ECS Tuning | ||
| 09 | Distribution piece | M10X1 | 1 | 34341111435 | $8.08 | ENDED | Shop at ECS Tuning | |||
| 10 | Washer | A8 | 2 | 33173628125 | $0.95 | ENDED | Shop at ECS Tuning | |||
| 11 | Hex bolt | M12X1,5X25 | 2 | 07119911694 | $0.82 | Shop at ECS Tuning | ||||
| 12 | Levelling switch | 1 | 37121111124 | $476.53 | ENDED | Shop at ECS Tuning | ||||
| 13 | Wiring set | 1 | 61111357175 | ENDED | Shop at ECS Tuning | |||||
| 14 | Grommet | 1 | 16124780109 | $1.51 | Shop at ECS Tuning | |||||
| 15 | Pipe | 1 | 34322283835 | $11.17 | Shop at ECS Tuning | |||||
| 16 | Bracket | 2 | 37131113098 | ENDED | Shop at ECS Tuning | |||||
| 17 | Spring washer | B8 | 2 | 07119933096 | $0.18 | Shop at ECS Tuning | ||||
| 18 | Hex nut | M8-8-ZNS3 | 2 | 02/1977 | 07119904032 | $0.16 | Shop at ECS Tuning | |||
| 18 | Hex nut | M8-8-ZNNIV SI | 2 | 07119905515 | $0.16 | Shop at ECS Tuning | ||||
| 19 | Insulating hose | 2 | 37131113100 | ENDED | Shop at ECS Tuning | |||||
| 20 | Pipe | M10/M10-283MM | 1 | 34326755328 | $5.83 | Shop at ECS Tuning | ||||
| 21 | Washer | 10X25X1,5-ZNS3 | 3 | 37131114028 | $0.80 | Shop at ECS Tuning | ||||
| 22 | Rubber grommet | 3 | 34306865954 | Shop at ECS Tuning | ||||||
| 23 | Washer | 14X25X2-ZNS3 | 3 | 34301163613 | $0.83 | Shop at ECS Tuning | ||||
| 24 | Bushing | 6 | 37131113373 | ENDED | Shop at ECS Tuning | |||||
Notes
- ENDED = the part has been discontinued (no longer available).
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 2500-3.3Li 2800 Levelling device/tubing rear?
- This technical diagram illustrates the Levelling device/tubing rear within the Rear Axle group for the 2500-3.3Li 2800 produced during 1973. It provides a detailed exploded view of the components, identifying key parts such as the Pressure hose assy (Part #37121112830).
- Which models use the hardware listed in this Levelling device/tubing rear?
- The hardware and components featured in the Levelling device/tubing rear are specific to the 2500-3.3Li 2800 produced during 1973. These technical specifications ensure that parts like the Pressure hose assy (37121112830) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Levelling device/tubing rear assembly?
- Each item in the Levelling device/tubing rear corresponds to the numbered list below the illustration. For the 2500-3.3Li 2800, you can identify the Pressure hose assy by locating its position on the schematic, which then links to the official BMW part number 37121112830 for the Rear Axle section.