Differential-drive/output for BMW 7 Series E65 745i (2003)
This Differential-drive/output technical drawing provides a detailed breakdown of the assembly for the 7 Series E65 745i. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 2003.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 01 | Rear-axle-drive | I=3,38 | 1 | 12/2002 | 33107526371 | $1580.29 | Shop at ECS Tuning | |||
| 02 | Hex bolt with washer | M12X1,5X87 ZNS3 | 1 | 33326760346 | $2.75 | Shop at ECS Tuning | ||||
| 03 | Hex bolt with washer | M12X1,5X108ZNS3 | 1 | 33306760347 | $2.54 | Shop at ECS Tuning | ||||
| 04 | Hex bolt | M14X1,5X110 | 1 | 33176760342 | $3.50 | Shop at ECS Tuning | ||||
| 05 | Combination nut | M14X1,5-10ZNS3 | 1 | 33326760380 | $2.48 | Shop at ECS Tuning | ||||
| 06 | Securing plate | 1 | 33121205138 | $1.33 | Shop at ECS Tuning | |||||
| Important! Drive flange and nut must not be replaced. |
||||||||||
| 07 | dustcover plate, large | 1 | 33127518511 | $2.11 | Shop at ECS Tuning | |||||
| 08 | dustcover plate, small | 1 | 33121214064 | $0.84 | Shop at ECS Tuning | |||||
| 09 | Shaft seal | 50X78X10 AW 215 | 1 | 33107609536 | Shop at ECS Tuning | |||||
| 10 | Drive flange output | VL-107 | 2 | 33131213986 | $74.53 | Shop at ECS Tuning | ||||
| only in conjunction with | ||||||||||
| -- | Shaft seal with lock ring | 100X50X10 | 2 | 33107505605 | $20.09 | Shop at ECS Tuning | ||||
| LK = bolt hole | ||||||||||
| 11 | Dust guard ring, outer | D=80 | 2 | 33131214445 | $1.57 | Shop at ECS Tuning | ||||
| 12 | Dust guard ring, inner | D=54 | 2 | 33131214446 | $1.50 | Shop at ECS Tuning | ||||
| 13 | Shaft seal with lock ring | 100X50X10 | 2 | 33107505605 | $20.09 | Shop at ECS Tuning | ||||
| 14 | Lock Ring | D=26,7 | 2 | 33131213997 | $0.29 | Shop at ECS Tuning | ||||
| 15 | Stick-on label | DE, EN | 1 | 01399791197 | $4.25 | Shop at ECS Tuning | ||||
| 16 | BMW synthetic OSP | 1L | X | 83222365987 | Shop at ECS Tuning | |||||
| Filling quantity, see Additional Information |
||||||||||
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 7 Series E65 745i Differential-drive/output?
- This technical diagram illustrates the Differential-drive/output within the Rear Axle group for the 7 Series E65 745i produced during 2003. It provides a detailed exploded view of the components, identifying key parts such as the Rear-axle-drive (Part #33107526371).
- Which models use the hardware listed in this Differential-drive/output?
- The hardware and components featured in the Differential-drive/output are specific to the 7 Series E65 745i produced during 2003. These technical specifications ensure that parts like the Rear-axle-drive (33107526371) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Differential-drive/output assembly?
- Each item in the Differential-drive/output corresponds to the numbered list below the illustration. For the 7 Series E65 745i, you can identify the Rear-axle-drive by locating its position on the schematic, which then links to the official BMW part number 33107526371 for the Rear Axle section.