Differential-drive/output for BMW 3 Series E90 335i (2008)
This Differential-drive/output technical drawing provides a detailed breakdown of the assembly for the 3 Series E90 335i. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 2008.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| i | For vehicles with Automatic transmission |
S205A=No |
||||||||
| 01 | Rear-axle-drive | I=3,08 | 1 | 33107571186 | $2489.30 | Shop at ECS Tuning | ||||
| Important! Note Repair Manual |
||||||||||
| 02 | Hex bolt with washer | M12X1,5X100 | 1 | 33176760343 | $2.05 | Shop at ECS Tuning | ||||
| 03 | Hex bolt with washer | M12X1,5X100 | 1 | 33176760343 | $2.05 | Shop at ECS Tuning | ||||
| 04 | Hex bolt | M14X1,5X110 | 1 | 01/2009 | 33176760342 | $3.50 | Shop at ECS Tuning | |||
| 05 | Combination nut | M14X1,5-10ZNS3 | 1 | 33326760380 | $2.48 | Shop at ECS Tuning | ||||
| 06 | Repair kit insert nut | M39X1,5X16,5 | 1 | 26117567770 | $17.52 | SI 1 21 06(300) | Shop at ECS Tuning | |||
| Important! Note Repair Manual |
||||||||||
| 07 | dustcover plate, large | 1 | 33127518511 | $2.11 | Shop at ECS Tuning | |||||
| 08 | dustcover plate, small | 1 | 33121214064 | $0.84 | Shop at ECS Tuning | |||||
| 09 | Shaft seal | 50X78X10 AW 215 | 1 | 33107609536 | Shop at ECS Tuning | |||||
| Important! Note Repair Manual Only in conjunction with position 6 |
||||||||||
| 10 | Drive flange output | LK=86MM/M10 | 2 | 06/2014 | 33137513941 | $99.09 | ENDED | Shop at ECS Tuning | ||
| LK = bolt hole | ||||||||||
| 10 | Drive flange output | LK=86MM/M10 | 2 | 33137500874 | $105.28 | Shop at ECS Tuning | ||||
| only in conjunction with | ||||||||||
| -- | Shaft seal with lock ring | 100X50X10 | 2 | 33107505605 | $20.09 | Shop at ECS Tuning | ||||
| LK = bolt hole | ||||||||||
| 11 | dustcover plate, large | 2 | 33137500876 | $1.97 | Shop at ECS Tuning | |||||
| 12 | dustcover plate, small | 2 | 33137500877 | $1.54 | Shop at ECS Tuning | |||||
| 13 | Shaft seal with lock ring | 100X50X10 | 2 | 33107505605 | $20.09 | Shop at ECS Tuning | ||||
| 14 | Lock Ring | D=26,7 | 2 | 33131213997 | $0.29 | Shop at ECS Tuning | ||||
| 15 | Stick-on label | DE, EN | 1 | 01399791197 | $4.25 | Shop at ECS Tuning | ||||
| 16 | BMW synthetic OSP | 1L | X | 07/2011 | 83222365987 | Shop at ECS Tuning | ||||
| Filling quantity, see Additional Information |
||||||||||
Notes
- SI = Service Information
- ENDED = the part has been discontinued (no longer available).
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 3 Series E90 335i Differential-drive/output?
- This technical diagram illustrates the Differential-drive/output within the Rear Axle group for the 3 Series E90 335i produced during 2008. It provides a detailed exploded view of the components, identifying key parts such as the Rear-axle-drive (Part #33107571186).
- Which models use the hardware listed in this Differential-drive/output?
- The hardware and components featured in the Differential-drive/output are specific to the 3 Series E90 335i produced during 2008. These technical specifications ensure that parts like the Rear-axle-drive (33107571186) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Differential-drive/output assembly?
- Each item in the Differential-drive/output corresponds to the numbered list below the illustration. For the 3 Series E90 335i, you can identify the Rear-axle-drive by locating its position on the schematic, which then links to the official BMW part number 33107571186 for the Rear Axle section.