Front brake pad wear sensor for BMW 7 Series E65 730i (2008)
This Front brake pad wear sensor technical drawing provides a detailed breakdown of the assembly for the 7 Series E65 730i. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 2008.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 01 | Caliper housing left | 1 | 34116753659 | $425.42 | Shop at ECS Tuning | |||||
| 01 | Caliper housing right | 1 | 34116753660 | $425.42 | Shop at ECS Tuning | |||||
| 02 | Calliper carrier | 2 | 34116753661 | $245.82 | Shop at ECS Tuning | |||||
| 03 | Torx screw with washer | M12X1,5X43 ZNS3 | 4 | 34106864424 | Shop at ECS Tuning | |||||
| Note: Install on both sides | ||||||||||
| 04 | Repair kit guide bush | 2 | 34116758707 | $25.37 | Shop at ECS Tuning | |||||
| 05 | Protective plug | 4 | 34111154979 | $1.80 | Shop at ECS Tuning | |||||
| 06 | Guiding bolt | 4 | 34111157041 | $20.02 | Shop at ECS Tuning | |||||
| 07 | Guiding bolt | 2 | 34116757036 | $21.50 | Shop at ECS Tuning | |||||
| 08 | Clip | 2 | 34116757253 | $17.25 | Shop at ECS Tuning | |||||
| 09 | Dust cap | 2 | 34111163435 | $4.20 | Shop at ECS Tuning | |||||
| 10 | Ventilation valve | M10X1 | 2 | 34116768018 | $6.60 | Shop at ECS Tuning | ||||
| 11 | Repair set brake caliper | 2 | 34111163647 | $25.42 | Shop at ECS Tuning | |||||
| 12 | Repair kit, brake pads asbestos-free | 1 | 34116794915 | Shop at ECS Tuning | ||||||
| The following additional parts are also essential: - brake pad sensor - brake pad paste The following recommendation applies to vehicles more than 48 months old: - Replace retaining spring refer to Repair Manual! |
||||||||||
| 13 | Brake pad wear sensor | 1 | 34356778037 | $24.00 | Shop at ECS Tuning | |||||
| 14 | Brake pad paste | 3G | 2 | 83192158851 | Shop at ECS Tuning | |||||
| 15 | Universal socket housing uncoded | 2 POL. | 1 | 61131392246 | $5.53 | Shop at ECS Tuning | ||||
| only in conjunction with | ||||||||||
| -- | Contact bushing MQS ELA with cable | 0,35-0,5 MM² AG | 2 | 61130056961 | Shop at ECS Tuning | |||||
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 7 Series E65 730i Front brake pad wear sensor?
- This technical diagram illustrates the Front brake pad wear sensor within the Brakes group for the 7 Series E65 730i produced during 2008. It provides a detailed exploded view of the components, identifying key parts such as the Caliper housing left (Part #34116753659).
- Which models use the hardware listed in this Front brake pad wear sensor?
- The hardware and components featured in the Front brake pad wear sensor are specific to the 7 Series E65 730i produced during 2008. These technical specifications ensure that parts like the Caliper housing left (34116753659) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Front brake pad wear sensor assembly?
- Each item in the Front brake pad wear sensor corresponds to the numbered list below the illustration. For the 7 Series E65 730i, you can identify the Caliper housing left by locating its position on the schematic, which then links to the official BMW part number 34116753659 for the Brakes section.