Front brake pad wear sensor for BMW 4 Series F32 428i (2016)
This Front brake pad wear sensor technical drawing provides a detailed breakdown of the assembly for the 4 Series F32 428i. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 2016.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| i | For vehicles with M Sports package and M Sport brakes |
P337A=Yes S2NHA=No |
||||||||
| 01 | Repair kit, brake pads asbestos-free | 1 | 07/2015 | 34106878878 | Shop at ECS Tuning | |||||
| The following parts are also mandatory: - brake pad wear sensor - brake pad paste Also recommended for vehicles older than 48 months: - replace expanding spring and guide pin see repair instruction! |
||||||||||
| 02 | Brake pad wear sensor, front left | 1 | 07/2015 | 34356792289 | Shop at ECS Tuning | |||||
| 03 | Guide pin | 2 | 07/2015 | 34116850934 | Shop at ECS Tuning | |||||
| 04 | Expansion spring | 2 | 07/2015 | 34116862801 | Shop at ECS Tuning | |||||
| 05 | Brake pad paste | 3G | 2 | 07/2015 | 83192158851 | Shop at ECS Tuning | ||||
| 06 | Torx screw with washer | M12X1,5X43 ZNS3 | 4 | 07/2015 | 34106864424 | Shop at ECS Tuning | ||||
| Note: Install on both sides | ||||||||||
| 07 | Caliper housing left | 1 | 07/2015 | 34116865537 | Shop at ECS Tuning | |||||
| 07 | Caliper housing right | 1 | 07/2015 | 34116865538 | Shop at ECS Tuning | |||||
| 08 | Ventilation valve | 2 | 07/2015 | 34116780509 | $3.12 | Shop at ECS Tuning | ||||
| 09 | Dust cap | 2 | 07/2015 | 34116780508 | $1.95 | Shop at ECS Tuning | ||||
| 10 | Repair set brake caliper | 2 | 07/2015 | 34116850935 | Shop at ECS Tuning | |||||
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 4 Series F32 428i Front brake pad wear sensor?
- This technical diagram illustrates the Front brake pad wear sensor within the Brakes group for the 4 Series F32 428i produced during 2016. It provides a detailed exploded view of the components, identifying key parts such as the Repair kit, brake pads asbestos-free (Part #34106878878).
- Which models use the hardware listed in this Front brake pad wear sensor?
- The hardware and components featured in the Front brake pad wear sensor are specific to the 4 Series F32 428i produced during 2016. These technical specifications ensure that parts like the Repair kit, brake pads asbestos-free (34106878878) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Front brake pad wear sensor assembly?
- Each item in the Front brake pad wear sensor corresponds to the numbered list below the illustration. For the 4 Series F32 428i, you can identify the Repair kit, brake pads asbestos-free by locating its position on the schematic, which then links to the official BMW part number 34106878878 for the Brakes section.