Single components for trunk lid for BMW 3 Series E90 325i (2008)
This Single components for trunk lid technical drawing provides a detailed breakdown of the assembly for the 3 Series E90 325i. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 2008.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 01 | Trunk lid w/ hole for lock assembly | 1 | 09/2008 | 41627151491 | $591.77 | Shop at ECS Tuning | ||||
| 02 | Left trunk lid hinge | 1 | 41627210675 | $46.58 | Shop at ECS Tuning | |||||
| 02 | Right trunk lid hinge | 1 | 41627210676 | $46.58 | Shop at ECS Tuning | |||||
| 03 | Stop buffer | 2 | 51247145085 | $0.80 | Shop at ECS Tuning | |||||
| 04 | Cap | 2 | 51248391066 | $0.83 | Shop at ECS Tuning | |||||
| 05 | Hex bolt with washer | M8X25 | 4 | 07147031946 | $0.82 | Shop at ECS Tuning | ||||
| 06 | Hex bolt with washer | M8X23 | 4 | 07147131648 | $1.05 | Shop at ECS Tuning | ||||
| 07 | Gas pressurized spring f trunk lid | 300N | 2 | 51247250308 | $38.80 | Shop at ECS Tuning | ||||
| 08 | Trunk lid gasket | 1 | 51767182079 | $49.63 | Shop at ECS Tuning | |||||
| 09 | Stop buffer | 2 | 51237049946 | $5.56 | Shop at ECS Tuning | |||||
| 10 | Blind plug | D=9,70MM | 2 | 51718235734 | $0.32 | Shop at ECS Tuning | ||||
| 11 | Blind plug | D=6MM | 2 | 51711904603 | $0.32 | Shop at ECS Tuning | ||||
| 12 | Expanding nut | 8X8 MM | 2 | 51127020321 | $0.47 | Shop at ECS Tuning | ||||
| 13 | Phillips screw f plastic material | TS5X16MM | 2 | 51118122522 | $0.39 | Shop at ECS Tuning | ||||
| 14 | Covering cap | WEISS | 2 | 51181813017 | $0.21 | Shop at ECS Tuning | ||||
| 14 | Covering cap | SCHWARZ | 2 | 51181823474 | $0.21 | Shop at ECS Tuning | ||||
| 14 | Covering cap | DUNKELBLAU | 2 | 64111375497 | $0.20 | Shop at ECS Tuning | ||||
| For vehicles with National version japan |
L807A=Yes |
|||||||||
| 15 | License plate bracket, rear | JAPAN | 1 | 51137176631 | Shop at ECS Tuning | |||||
| 15 | License plate holder | JAPAN | 1 | 51188253016 | $17.58 | Shop at ECS Tuning | ||||
| 16 | Adhesive pad | 10X45MM | 3 | 51187134021 | $1.00 | Shop at ECS Tuning | ||||
| For vehicles with National version japan |
L807A=Yes |
|||||||||
| 18 | Shim | 2 | 51188240761 | $1.10 | Shop at ECS Tuning | |||||
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 3 Series E90 325i Single components for trunk lid?
- This technical diagram illustrates the Single components for trunk lid within the Bodywork group for the 3 Series E90 325i produced during 2008. It provides a detailed exploded view of the components, identifying key parts such as the Trunk lid w/ hole for lock assembly (Part #41627151491).
- Which models use the hardware listed in this Single components for trunk lid?
- The hardware and components featured in the Single components for trunk lid are specific to the 3 Series E90 325i produced during 2008. These technical specifications ensure that parts like the Trunk lid w/ hole for lock assembly (41627151491) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Single components for trunk lid assembly?
- Each item in the Single components for trunk lid corresponds to the numbered list below the illustration. For the 3 Series E90 325i, you can identify the Trunk lid w/ hole for lock assembly by locating its position on the schematic, which then links to the official BMW part number 41627151491 for the Bodywork section.